Application of de novo programming method in production planning at UMKM seasoning Opaque Tuntungan II
DOI:
https://doi.org/10.24042/djm.v7i3.24430Keywords:
De Novo Programming, Linear Program, Planning, ProductionAbstract
Optimization is a way of solving mathematical problems to get optimal results. One way to solve optimization problems is to use a linear program. One of the developments of linear program models that can be used in optimization problems is de novo programming. This research uses de novo programming to maximize profits at UMKM Seasoning Opaque. Based on the results of the analysis with the POM-QM application, it can be concluded that the production of Tuntungan II seasoning opaque factory for 7 weeks is optimal with the production of 2,031 kg of salted seasoning opaque, 1,170 kg of regular spicy seasoning opaque, and 3,381 kg of round spicy seasoning opaque. Using the De Novo Programming method, it was found that the optimal production for 7 weeks of the opaque spice factory in Tuntungan II for 7 weeks had a profit of Rp12,317,240.
References
Antika, W., Dur, S., & Aprilia, R. (2023). Optimasi produksi gula merah home industry dari nira sawit dengan model de novo programming. G-Tech: Jurnal Teknologi Terapan, 7(3), 1327–1334. https://doi.org/10.33379/gtech.v7i3.2975
Astuti, N. E. D., Linawati, L., & Mahatma, T. (2013). Penerapan model linear goal programming untuk optimasi perencanaan produksi. Prosiding Seminar Nasional Sains Dan Pendidikan Sains VIII, 4(1).
Budianti, R. S., Ramdani, Y., & Respitawulan. (2021). Optimasi produksi buis beton menggunakan model de novo programming pada sakti beton jaya mandiri. Jurnal Riset Matematika, 1(1), 46–56. https://doi.org/10.29313/jrm.v1i1.161
Enny, A. (2009). Perencanaan produksi dengan metode de novo programing untuk memperoleh keuntungan yang maksimal di pt. keramik diamond industries gresik. Jurnal Penelitian Ilmu Teknik, 9(2).
Iriani. (2012). Efektivitas perencanaan produksi dengan pendekatan de novo programming.
Isnaini, W. (2019). Perencanaan produksi. UNIPMA Press.
Kadin Indonesia. (2024). UMKM indonesia. Retrieved from https://kadin.id/data-dan-statistik/umkm-indonesia/#:~:text=Peran%20UMKM%20sangat%20besar%20untuk,%2C%20setara%20Rp9.580%20triliun
Lubis, H. H., Dur, S., & Cipta, H. (2021). Optimasi produksi bandrek dengan penerapan metode goal programming. Journal of Maritime and Education (JME), 3(1). https://doi.org/10.54196/jme.v3i1.38
Mardliyah, S., Fajar, M. Y., & Badruzzaman, F. H. (2022). Penggunaan forecasting dan goal programming dalam optimasi perencanaan produksi beras. Bandung Conference Series: Mathematics, 2(1). https://doi.org/10.29313/bcsm.v2i1.2033
Novyanti, N., Marlina, E., Andiani, D., & Ruhiat, D. (2023). Optimasi produksi jaket menggunakan metode goal programming (Studi kasus: Konveksi di holi kecamatan cimaung). JRMST: Jurnal Riset Matematika Dan Sains Terapan, 3(1), 30–38.
Oktavia, B., & Winanda, R. S. (2023). Optimasi perencanaan produksi usaha keripik sanjai rina menggunakan pendekatan de novo programming. Journal of Mathematics UNP, 8(3), 51–57.
Oktavianto, R., Ngatilah, Y., & Pulansari, F. (2017). Perencanaan produksi sandal dengan metode de novo programming untuk memaksimalkan keuntungan di cv. shakilla waru, sidoarjo.
Primalasari, I., & Octali, V. (2023). Analisis saluran pemasaran opak singkong (studi kasus di desa m sitiharjo kabupaten musi rawas). Jurnal Prodi Agribisnis, 4(1), 1–6. https://doi.org/10.56869/kaliagri.v4i1.472
Safitri, N., Kiftiah, M., & Pasaribu, M. (2024). Pemodelan de novo programming dengan metode simpleks dan metode cutting plane untuk mengoptimalkan perencanaan produksi usaha kecil menengah. Euler : Jurnal Ilmiah Matematika, Sains Dan Teknologi, 12(1), 105–112. https://doi.org/10.37905/euler.v12i1.25242
Sari, R. F., Aprilia, R., & Rollingka, H. P. (2022). Optimisasi keuntungan penjualan kopi di warung bandar kopi deli serdang dengan metode cutting plane. G-Tech: Jurnal Teknologi Terapan, 6(2), 316–323. https://doi.org/10.33379/gtech.v6i2.1698
Simanjuntak, G. C. (2017). Kajian pemodelan matematika berbentuk optimasi graph.
Siregar, N. U., Sari, R. F., & Aprilia, R. (2024). Optimisasi perencanaan produksi menggunakan metode de novo programming dan pendekatan minimum-maximum (min-max) goal programming. SAINTIFIK, 10(2). https://doi.org/10.31605/saintifik.v10i2.498
Susetyo, J., Asih, E. W., & Manullang, E. (2020). Optimasi perencanaan produksi menggunakan model de novo programming dengan pendekatan goal programming pada produksi pembuatan roti.
Vania, A., & Helma, H. (2023). Penerapan metode de novo programming dalam perencanaan produksi stik kentang pada ukm delima bandara di kabupaten padang pariaman. Journal Of Mathematics UNP, 8(3), 42–50.
Widarman, A., Yudha, H. S., & Kamal, M. R. R. (2022). Perencanaan produksi dengan metode de novo programming untuk mengoptimalkan keuntungan perusahaan di cv. Jaya mukti bangkit purwakarta. Jurnal Teknologika, 12(1), 1–12.
Yulianto, A., Husna, S., & Syukri, A. (2020). Penggunaan model de novo programming dengan pendekatan min-max programming dalam perencanaan produksi. Journal of Industrial & Quality Engineering, 8(2).
Yusnita, E. (2019). Aplikasi metode de novo programming untuk optimasi perencanaan produksi. JIME (Journal of Industrial and Manufacture Engineering), 4(1).
Downloads
Published
Issue
Section
License
As an Author of the journal, you have the rights to a variety of uses of your article, including use by the institute or company you work for. These Author Rights may be exercised without the need for specific permission.
Authors and readers may copy and redistribute material in any medium or format, as well as remix, modify, and construct material for any purpose, even commercially, but they must give due credit (quote article or content), provide links to the license, and state if changes have been made. If you remix, modify or build material, you must distribute your contribution under the same license as the original.
Authors who submit manuscripts do so on the understanding that if accepted for publication, the copyright of the article must be submitted to Decimal: The Journal of Mathematics as the publisher of the journal.
